MaxTrax PRIME CONSTRUCTION
This is a series specifically for construction industry.
It offers access to over 40 titles.


View some samples of MaxTrax PRIME CONSTRUCTION here. Scroll down the thumbnails to view all the samplers.

  • Accident
    Investigation
    “Accidents will happen”. We have all heard that statement before. Unfortunately, sometimes it is true. In spite of our best efforts, things occasionally do go wrong.

    While many accidents seem to happen for obvious reasons, there may be things that contribute to an accident which are not always apparent. That is why it is vital to conduct a thorough Accident Investigation.

    This video on “Accident Investigation” show employees steps that are taken in an accident investigation, and highlight how important it is for employees to fully cooperate with any inquiry.

    They also point out that while an investigation’s focus is to determine the cause of an accident, the overall goal is to prevent similar accidents from happening again.

    The topics covered in the products include:

    • The goals of an accident investigation.
    • Securing an accident scene.
    • “Root-cause” analysis.
    • The importance of investigative interviews.
    • Assisting in an accident investigation.
    • Reporting the “near misses”.
    • The role of policies, equipment and training on accident prevention.
    • …and more.

     
    Time: 13 Minutes

  • Aerial Lifts in Industrial and Construction Environments

    Reaching high places can be challenging in many work environments.

    But whether they’re on a construction site, changing light bulbs in a warehouse, or performing outdoor utility work, employees often use aerial lifts to help them access work areas that would otherwise be almost impossible to get to.

    SafetyMax’s training products on “Aerial Lifts in Industrial and Construction Environments” review the various types of aerial lifts, make employees aware of the hazards that are associated with these lifts, and give them the information that they’ll need to work safely… whether they’re using a lift or working around one.

    Topics covered in the program include:

    • The types of aerial lifts and the training required to operate them.
    • The hazards associated with using aerial lifts.
    • “Pre-start” and “worksite” inspections.
    • Setting up, operating and moving an aerial lift.
    • Working on the ground near an aerial lift.

    Time: 16 Minutes

  • Asbestos
    Awareness
    In August of 1994, OSHA issued 29 CFR 1910.1101… “Occupational Exposure to Asbestos.” This regulation requires that all employees who could come into contact with materials that might contain Asbestos be given appropriate training on working safely in these situations.

    For many years Asbestos was commonly used in ceiling tiles, flooring, wall and pipe insulation, and other building materials. Because Asbestos is still commonly found in older structures, the “Occupational Exposure to Asbestos” regulation applies to any worker who may be exposed to this material, including custodial, janitorial and maintenance personnel.

    This training program “Asbestos Awareness” has been created specifically to educate employees about the dangers of working with materials that may contain Asbestos. The program provides the majority of the information needed to satisfy the training requirements for Class IV employees under the OSHA regulation.

    Areas covered in the program include:

    • The hazards of Asbestos.
    • OSHA’s Asbestos Standard.
    • The composition and nature of Asbestos.
    • The types of materials that may contain Asbestos, and where they are encountered.
    • Limiting exposure to Asbestos.
    • How to protect yourself when disturbing a material that may contain Asbestos.
    • Special considerations such as air monitoring and decontamination.
    • …and more.

     
    Time: 14 Minutes

  • Back
    Safety
    For many employees, back injuries are something that “happens to the other person… not to me.”

    Yet four out of five people will experience some type of back problems during their lives.

    And many back injuries are caused by common activities experienced both on and off the job… such as lifting, climbing, reaching, etc.

    This video on “Back Safety” emphasize the importance of overall back care, both at work and at home, including exercises and weight control.

    Topics covered in these products include:

    • How the back works.
    • Common types and causes of back injuries.
    • Effects of back injuries.
    • Injury prevention and safety practices.
    • Proper lifting techniques.
    • …and more.

     
    Time: 21 Minutes

  • Blood borne Pathogens
    – Heavy Industry
    Bloodborne diseases are a serious concern in the working environment. “Hepatitis B” infects over 70,000 people annually, and has over one million “carriers” in the U.S. alone The HIV virus, which usually leads to AIDS, currently infects over one million people.

    This video on “Bloodborne Pathogens in Heavy Industry” have been specifically created to assist facilities in Bloodborne Pathogens situations.

    Topics covered in these products include:

    • Epidemiology and symptoms of bloodborne diseases.
    • Modes by which bloodborne disease is transmitted.
    • The Exposure Control Plan.
    • Recognition of exposure situations.
    • Practices to prevent exposure.
    • HBV vaccination.
    • Emergency procedures.
    • Signs and labels.
    • Selection and use of personal protective equipment.
    • …and more.

     
    Time: 24 Minutes

  • Compressed Gas
    Cylinders
    In today’s work environments, compressed gas is used for many things… refrigeration… welding… heating… and a number of other functions.

    Compressed gas can be dangerous, and employees who work with them need to know how to handle them properly.

    This video on “Compressed Gas Cylinders” provide the information employees need to handle and transport these potentially volatile storage containers.

    Topics covered in these products include:

    • Associated hazards.
    • Moving and transporting cylinders safely.
    • Positioning cylinders properly.
    • Proper “hook-up” procedures.
    • Safe storage practices.
    • Storage “incompatibilities”.
    • …and more.

     
    Time: 12 Minutes

  • Confined Space
    Entry
    These products were created specifically for OSHA’s Permit Required Confined Space Regulation (29 CFR Part 1910.146).

    Because of OSHA’s broad definition of “confined space”, this video will be useful to a number of different types of facilities, including manufacturers, utilities, petroleum and chemical industries, hospitals and many others.

    This video on “Confined Space Entry” address the major areas of employee training required by the regulation.

    Topics covered in these products include:

    • Contents of the standard.
    • Responsibilities of the employer, entry supervisors, attendants and entrants.
    • Identifying permit spaces.
    • Types of hazards that can be encountered.
    • Safety equipment.
    • Dealing with emergencies and rescue teams.
    • …and more.

     
    Time: 19 Minutes

  • Conflict Resolution in
    Industry Facilities
    Conflict in the workplace is inevitable. Anytime two or more people come together, they will eventually disagree about something. While some conflict can be healthy, it is often an indication that there is something wrong. Conflict is frequently a “call to action”… a problem crying out for a solution.

    The good news about conflict is that it is usually based on “caring”. The more someone defends their point of view in an argument, the more they care. But if conflict is allowed to fester and grow without a resolution, it can lead to serious problems such as threats and even physical violence. The effectiveness of an entire organization can be harmed if conflict is allowed to escalate.

    This training products on “Conflict Resolution in Industrial Facilities” discuss the techniques and strategies that can be used to limit the damage and disruption conflict can cause in the workplace. They show employees that when difficult situations are dealt with in a calm and unemotional way, compromise and collaboration are possible… and a lot can be gained from resolving a conflict.

    Topics covered in these products include:

    • The consequences of conflict and how it can disrupt the workplace.
    • How resolving workplace conflict is an integral part of everyone’s job.
    • The common causes of workplace conflict and how to recognize them.
    • Diffusing disagreements before they get out of hand.
    • The damage that escalating conflict and violence can do to an organization.
    • How collaboration can be a valuable tool in resolving conflicts.
    • How to apply proven conflict resolution techniques and strategies.
    • …and more.

     
    Time: 19 Minutes

  • Crane Safety in
    Construction Environments
    While there are many different types of cranes, they all have the ability to make many jobs much easier by lifting enormous weight. But they also share the potential for disaster when they are not operated safely. Crane-related accidents can often be deadly, due to the cumbersome and heavy loads that are lifted.

    A small miscalculation, or a brief moment of inattention, and tragedy could strike. Once a load falls, not much can be done to stop it, and there is little time for people to move safely out of the way. A coworker could be injured or killed, and expensive equipment or materials could be damaged or destroyed… even the crane itself.

    SafetyMax’s training products on “Crane Safety in Construction Environments” remind employees that over 90% of crane-related accidents are caused by human error… and that they are the key to preventing these incidents.

    Topics covered in these products include:

    • Equipment inspection.
    • General and operational safety devices.
    • General operating procedures.
    • Working with boom cranes.
    • and more!

     
    Time: 14 Minutes

  • Dealing with Drug and Alcohol Abuse for Employees in Construction Environments
    Substance abuse is a huge, worldwide problem. In the United States alone there are over 50 million binge drinkers, 17 million illegal drug users and almost 15 million people who abuse prescription drugs.

    Most substance abusers have jobs. In fact, it is estimated that one out of every ten workers has a substance abuse problem.

    An employee with an alcohol or drug problem can decrease productivity, create a hostile work environment and damage a company’s good name. Worst of all, the actions of a worker who is “under the influence” can completely undermine a company’s efforts to keep people safe.

    The first in a two-part series on dealing with drug and alcohol abuse in the workplace, this video on “Dealing with Drug and Alcohol Abuse for Employees” discuss the various types of substance abuse that are found in the workplace, how they can affect an employee’s work situation and what employees themselves can do to help keep their workplace drug and alcohol free.

    Topics covered in these products include:

    • How substances are typically abused by employees.
    • Alcohol and other depressants, and their effects.
    • Stimulants, narcotics and hallucinogens, and their effects.
    • How people get “hooked” on drugs and alcohol.
    • Alcohol and drug policies.
    • Helping employees overcome substance abuse.
    • …and more.

     
    Time: 19 Minutes

  • Dealing with Drug and Alcohol Abuse for Managers and Supervisors in Construction Environments
    Supervisors need to respect a worker’s private life. But what if a worker had too much to drink one night? Or another worker smoked some dope over a weekend? How about the employee who has been taking medications that could impair their ability to work safely?

    When substance abusers arrive at work, they don’t leave their problems at the door. What these employees are doing both on and off -duty could cause them to have a serious accident. Managers and supervisors need to know how substance abuse can affect a workplace, how to recognize signs of abuse and what they can do to handle abuse situations.

    The second in a two-part series on dealing with drug and alcohol abuse in the workplace, SafetyMax’s training products on “Dealing with Drug and Alcohol Abuse… for Managers and Supervisors in Construction Environments” discuss the various forms of substance abuse that are typically found in the workplace, how managers and supervisors can detect substance abuse problems, and what they should… and shouldn’t… do if they discover a worker with a substance abuse problem.

    Topics covered in these products include:

    • How substance abuse can affect a workplace.
    • Related laws and regulations.
    • Creating an alcohol and drug-free workplace.
    • The roles of education and testing.
    • Recognizing on-the-job substance abuse.
    • How to handle substance abuse situations.

    Time: 19 Minutes

  • Electrical
    Safety
    Electricity is all around us. It lights up our homes… powers much of the machinery and equipment that we use… and runs many of our tools. We are so used to it, most employees “take it for granted.” Yet electricity can also be dangerous. Employees need to know how electricity works, and what they should do to protect themselves from its hazards.

    This video on “Electrical Safety” remind employees about electrical hazards they may face in their jobs, and provides the information they need to work safely around electricity.

    This program will also assist in satisfying the OSHA training requirements under 29 CFR Part 1910.331 (Electrical Safety Standard) for “non-qualified” employees.

    Topics covered in these products include:

    • How electricity works.
    • Fuses and circuit breakers.
    • Grounding and GFIs.
    • Safe work practices.
    • Outlets, plugs and extension cords.
    • Working with electrical equipment.
    • Using ladders around electricity.
    • Electrical emergencies.
    • …and more.

     
    Time: 15 Minutes

  • Electrocution Hazards In Construction Environments PART I – Types of Hazards and How You Can Protect Yourself

    Over the years, electrocution has become the fourth leading cause of death in the construction industry. Contrary to common perception, it does not take a great deal of electricity to cause an electrocution. Just the amount of current that it takes to light a common Christmas Tree bulb can stop the heart and result in death.

    There are a number of causes of shock, electrical burns and electrocution. If the power to electrical equipment is not grounded, the grounding path has been broken, or there are live parts or bare wires, a fault current can travel through your body. Even when a piece of equipment or a tool is properly grounded, it can instantly change from safe to hazardous because of extreme conditions or rough treatment. So employees need to know what hazards to watch out for and how they can protect themselves.

    The first in a two-part series on electrocution hazards, SafetyMax’s training products on “Electrocution Hazards In Construction Environments PART I… Types of Hazards and How You Can Protect Yourself ” discuss the major types of electrocution hazards, and how employees can protect themselves from electrical hazards and electrocution in construction environments.

    Topics covered in these products include:

    • Electrical hazards and electrocution.
    • Major types of electrocution hazards.
    • Power lines and GFCIs.
    • Power tools and extension cords.
    • Lock-out/tag-out.

    Time: 22 Minutes

  • Electrocution Hazards In Construction Environments PART 2 – Employers Requirement

    Construction sites can contain a number of potential electrical hazards. OSHA defines four types of hazards that are associated with electricity, and three types of injuries that result from them. Direct contact with electricity, through a power source, cord or transmission line is the most common type of electrical hazard, and can occur in a number of ways.

    Employers are required to train workers regarding electrocution hazards and the measures that they should take to control the hazards. Employers must also put procedures into place so that workers can get answers to any questions that they have about working safely around electrocution hazards.

    The second in a two-part series on electrocution hazards, SafetyMax’s training products on “Electrocution Hazards In Construction Environments PART II Employer Requirements” discuss the major types of electrocution hazards, and how employees can protect themselves from electrical hazards and electrocution in construction environments, as well as employers’ responsibilities in these areas.

    Topics covered in these products include:

    • Electrical hazards and electrocution.
    • Power lines and isolation.
    • Tools and equipment.
    • Assured Equipment Grounding Conductor Programs.
    • Lock-out/tag-out.
    • Employee training.

    Time: 22 Minutes

  • Eye Safety in
    Construction Environments
    Most employees take “healthy eyes” for granted. But our eyes are really very fragile, and statistics show that eye injuries occur frequently in the workplace.

    SafetyMax’s training products on “Eye Safety in Construction Environments” show how many eye problems are caused by not paying attention to the work employees are doing, or not wearing the appropriate protective equipment. They remind employees that eye injuries can easily happen to them and show them how to prevent these injuries.

    Topics covered in these products include:

    • Who is affected by eye problems… and how.
    • How the eye “works”.
    • Eyestrain.
    • Wearing contact lenses at work.
    • Physical and radiation hazards, and personal protective equipment.
    • and more.

     
    Time: 15 Minutes

  • Fall Protection In
    Construction Environments
    Falls are the second leading cause of death each year in the United States (after traffic accidents)! Over 10,000 people are killed every year as a result of falls…and 200,000 to 300,000 people are disabled. Eight-five percent of all falls that occur on the job result in “lost work time.”

    SafetyMax’s training products on “Fall Protection In Construction Environments” provide the information employees need to work safely when they are “off the ground”, and assist in satisfying the major training requirements in the OSHA Standard on Fall Protection.

    Topics covered in these products include:

    • The consequences of falls in the workplace.
    • Hazardous work environments.
    • The safety “mindset”.
    • Designing fall hazards out of the workplace.
    • Proper housekeeping techniques.
    • Protective measures.
    • Protective equipment.
    • and more!

     
    Time: 11 Minutes

  • Fire
    Extinguishers
    Among all the safety problems an employee can encounter, fire can be the most frightening.

    Every year fires cause hundreds of millions of dollars in damage and result in thousands of employee injuries, a number of which are fatal.

    Yet many of these catastrophes could have been prevented if the fire had been extinguished before it started to spread.

    This video on “Using Fire Extinguishers” look at why things burn, review the types of fire extinguishers that are found in facilities today, and discuss how to use fire extinguishers to fight small fires.

    Topics covered in these products include:

    • What causes things to burn.
    • The concept of “flashpoint”.
    • “Classes” of fires.
    • Fire extinguisher labels.
    • Chemical fire extinguishers.
    • Water fire extinguishers.
    • How to use a fire extinguisher.
    • …and more.

     
    Time: 18 Minutes

  • Industrial
    Fire Prevention
    Among all the safety problems an employee can encounter, fire can be the most frightening. Every year industrial fires cause millions of dollars in damage and result in hundreds of employee injuries, a number of which are fatal. Yet many employees do not realize how their own actions can contribute to the risk of fire.

    The training program “Industrial Fire Prevention” looks at what causes industrial fires, reviews steps that can be taken to help prevent fires and discusses what employees should do in case of a fire emergency.

    Areas covered in the program include:

    • Common causes of workplace fires.
    • Preventing industrial fires.
    • The concept of “flashpoint”.
    • “Classes” of fires.
    • Fire extinguishers.
    • Handling flammable materials.
    • Evacuation and other employee responsibilities.
    • First aid.
    • …and more.
        •  
        Time: 22 Minutes
  • First Aid in
    Construction Environments
    In most facilities, not a day goes by without some type of injury occurring. It can be as minor as a small cut or as serious as a chemical burn. But any injury can be painful and affect an employee’s work performance… as well as their life off the job.

    SafetyMax’s training products on “First Aid in Construction Environments” show employees that knowing basic first aid can often limit the severity of any type of injury, or even prevent a death.

    Topics covered in the program include:

    • Cuts and bleeding.
    • Muscle pulls and sprains.
    • Burns.
    • Broken bones.
    • Shock.
    • Artificial respiration and CPR.
    • AEDs (Automated External Defibrillators)
    • and more!

     
    Time: 16 Minutes

  • Forklift/Powered
    Industrial Truck Safety
    Forklifts and other powered industrial trucks are indispensable in many companies. They are rugged, powerful tools that save time, money and effort.

    But the same qualities that make them so helpful can also make them dangerous.

    Using powered industrial trucks results in over 100 fatalities and over 35,000 serious injuries each year. When used incorrectly, or if forklifts and other trucks are not properly maintained, they can do significant damage.

    This video on “Forklift/Powered Industrial Truck Safety” have been specifically created to assist facilities in complying with OSHA’s Powered Industrial Truck Standard.

    Topics covered in the program include:

    • OSHA’s certification process.
    • The seven classes of industrial trucks.
    • Equipment checkout and maintenance.
    • A forklift’s stability triangle.
    • Safe operating procedures.
    • Lifting and lowering loads.
    • Trucks and loading docks.
    • …and more.

     
    Time: 28 Minutes

  • GHS Container Labeling in Construction Environments

    Created specifically to assist facilities in complying with the employee training requirements of OSHA’s newly adopted GHS regulations, these products discuss how chemicals should be labeled under GHS.

    SafetyMax’s training products on “GHS Container Labeling in Construction Environments” discuss the six types of information contained on a GHS label, and the differences between GHS labels and other types of chemical hazard labels.

    Topics covered in the program include:

    • How the GHS changes chemical hazard labelling.
    • GHS labels’ text elements.
    • GHS labels’ pictograms.
    • Training and phase-in dates.

      • …and more.

    Time: 12 Minutes

  • GHS – Introduction in Construction Environment

    Created specifically to assist facilities in complying with the employee training requirements of OSHA’s newly adopted GHS regulations, these products discuss the Globally Harmonized System for the Classification and Labeling of Chemicals.

    SafetyMax’s training products on “Introduction to GHS (The Globally Harmonized System… for Construction Workers)” review what the Globally Harmonized System is all about, why OSHA adopted the GHS, and the phase-in dates for implementing the GHS.

    Topics covered in the program include:

    • What is the Globally Harmonized System?
    • Why Did OSHA adopt the GHS?
    • Hazard classification.
    • The “Safety Data Sheet”.
    • Container labeling (text elements).
    • Container labeling (pictograms).
    • Information and training.
    • GHS “phase in” dates.
    • …and more.

    Time: 20 Minutes

  • GHS Safety Data Sheets in Construction Environments

    Created specifically to assist facilities in complying with the employee training requirements of OSHA’s newly adopted GHS regulations, these products discuss using GHS Safety Data Sheets.

    SafetyMax’s training products on “GHS Safety Data Sheets in Construction Environments” review the composition of GHS Safety Data Sheets, the information that’s contained in each section and how SDS’s are different from Material Safety Data Sheets.

    Topics covered in the program include:

    • Material Safety Data Sheets and GHS SDS’s.
    • Materials and their hazards.
    • Hazardous materials emergencies.
    • Handling hazardous materials.
    • …and more.

    Time: 16 Minutes

  • Hand and Power Tool
    Safety in Construction
    Environments
    Most people have injured themselves with a tool at least once in their lives. In fact learning to use some tools seems to “require” a little pain. Unfortunately, tool accidents result in thousands of serious injuries and hundreds of deaths each year… most of which could have been avoided by simply handling tools safely. To avoid these types of accidents employees need to know how to handle their tools safely. But this can be a difficult task, since every tool has its own unique set of hazards.

    SafetyMax’s training products on “Hand and Power Tool Safety in Construction Environments” show how accidents can be significantly reduced by applying good general safety rules, and reviews what hazards are associated with the specific types of tools we use.

    Topics covered in the program include:

    • Tool hazards.
    • Tool maintenance.
    • Inspecting power tools.
    • Protecting yourself and others from hazards.
    • Personal protective equipment.
    • Choosing tools that “fit” you and the job.
    • and more!

     
    Time: 18 Minutes

  • Hand, Wrist and Finger
    Safety in Construction
    Environments
    Our hands, wrists and fingers are valuable tools… the most valuable we will ever own. Whether we are completing a project at work or playing catch with the kids – our hands are involved in just about everything we do. In fact, we use our hands so much that they are exposed to a multitude of hazards.

    Throughout the day our hands can encounter hazards such as:

    • Machines with heavy or fast moving parts that can pinch or grab.
    • Sharp tools that can cut or puncture.
    • And corrosive materials that can damage the skin.

     
    If these types of hazards go unchecked, they can cause real problems. Fortunately, there are a number of ways that we can protect and care for our hands.

    SafetyMax’s training products on “Hand, Wrist and Finger Safety in Construction Environments” discuss the various types of activities employees can engage in where their hands, wrists and fingers can be subject to injury, and what they can do to avoid hazards and protect their hands.

    Topics covered in the program include:

    • The hand… and how it works.
    • Preparing for the job.
    • Personal protective equipment.
    • Fit and care of personal protective equipment.
    • Ergonomic hazards.
    • and more!

     
    Time: 13 Minutes

  • Hazardous Communication For
    Building & Construction
    Companies
    Created specifically to assist building and construction companies of all types in complying with federal, state and municipal “Right-To-Know” regulations, this kit also addresses the major education and training requirements in these “chemical hazard” laws.

    SafetyMax’s training products on “Right-To-Know for Building and Construction Companies” both introduce employees to the “Right-To-Know” regulations and provide training on the various types of chemicals found in building and construction environments.

    Topics covered in the program include:

    • Chemical hazard concepts.
    • The Material Safety Data Sheet (MSDS).
    • Types of hazardous chemicals.
    • Characteristics and effects of various types of chemicals.
    • Safe handling practices.
    • Container labeling.
    • Use of personal protective equipment (PPE).
    • Spills and cleanup.
    • and more!

     
    Time: 21 Minutes

  • Hazardous Materials
    Labels
    One important method for identifying hazardous materials is through the use of container labels.

    From bottles and drums to trucks and railcars, labels and placards provide information about the contents of a container, as well as what to do and who to call in case of an emergency.

    Because this information is so critical for the safe handling and transporting of these potentially dangerous substances, several organizations have developed labeling and placarding systems to communicate to employees about a container’s contents.

    This video on “Hazardous Materials Labels” are designed to help employees understand the characteristics of different labeling systems and the ways that each convey information.

    By recognizing the differences and similarities of these systems, employees will be better prepared to work safely around hazardous materials.

    Topics covered in the program include:

    • Types of containers requiring labels and the information required on the label.
    • Department of Transportation (DOT) hazardous material classifications.
    • DOT label and placard requirements.
    • United Nations identification numbers.
    • The Hazardous Materials Identification System (HMIS).
    • The National Fire Prevention Association (NFPA) labeling system.
    • Hazardous waste labeling.
    • …and more.

     
    Time: 22 Minutes

  • Hazardous
    Spills
    Hazardous materials are a part of many work situations. They can be found in many different types of facilities and on many job sites… from manufacturing and construction to retail and office environments. Some organizations have to deal with hazardous materials as part of their daily business, and have detailed plans and highly trained workers to handle a sudden spill.

    But other facilities only have to handle these materials infrequently, and may not have given much thought to what must be done in case of a spill.

    This training program “Dealing with Hazardous Spills” is designed to help employees who seldom have to face the dangers of a hazardous spill deal with a cleanup situation.

    Areas covered in the program include:

    • The Hazard Communication Plan.
    • The Emergency Response Plan.
    • Five levels of OSHA’s HAZMAT training.
    • Initial spill response.
    • Spill containment.
    • Instruments used to identify chemicals involved in a spill.
    • Additional hazards of a spill site.
    • …and more.

     
    Time: 23 Minutes

  • Heat Stress in
    Construction Environments
    SafetyMax’s training products on “Heat Stress in Construction Environments” reminds employees that heat-related illnesses can occur in many situations, and reviews what can be done to address these situations. The program also discusses fundamental information on heat stress and other heat-related illnesses.

    Topics covered in the program include:

    • Situations that can cause heat-related illnesses.
    • Heat stress and the body’s cooling system.
    • Other heat-related illnesses.
    • Preparing to work in hot environments.
    • Engineering controls.
    • Treating heat-related illnesses.
    • and more!

     
    Time: 12 Minutes

  • Housekeeping and
    Accident Prevention
    Good safety housekeeping can significantly reduce accidents and injuries in any type of work environment. By developing good safety habits, and by being aware of work environments and any hazards associated with it, employees can reduce the risks.

    This training program “Safety Housekeeping and Accident Prevention” demonstrates to employees how to prevent workplace accidents by paying attention to safety housekeeping considerations.

    Areas covered in the program include:

    • Safety awareness.
    • Rubbish and excess materials.
    • Keeping aisles and stairways clean.
    • Ropes and electric cords.
    • Dealing with hazardous chemicals.
    • Tool maintenance.
    • Storage of tools.
    • …and more.

     
    Time: 13 Minutes

  • Ladder Safety in
    Construction Environments
    Ladders are one of the most commonly used pieces of equipment in almost any work environment. From common stepladders to sophisticated extension ladders, they can be found almost everywhere.

    SafetyMax’s training products on “Ladder Safety in Construction Environments” show that because they are so common, many employees take ladders for granted, and do not take the appropriate precautions when using ladders.

    Topics covered in the program include:

    • Ladder selection.
    • Inspection before use.
    • Setting up and moving ladders.
    • Climbing on ladders.
    • Ladder accidents.
    • and more!

     
    Time: 13 Minutes

  • Lock-Out
    / Tag-Out
    Created specifically to assist facilities in complying with the employee training requirements of OSHA’s “Lock-Out/Tag-Out” regulation, these products discuss the OSHA Lock-Out/Tag-Out Standard, including the Energy Control Plan.

    This video on “Lock-Out/Tag-Out” use environments familiar to employees working with both electric and hydraulic/pneumatic equipment and point out specifically where Lock-Out/Tag-Out procedures should be applied.

    Topics covered in the program include:

    • The regulation itself.
    • “Energized” machinery.
    • Lock-Out/Tag-Out concepts and procedures.
    • Lock-Out/Tag-Out devices.
    • Electrical systems.
    • Hydraulic and pneumatic systems.
    • …and more.

     
    Time: 22 Minutes

  • Materials Handling
    Safety
    Many employees feel that moving and handling materials that they work with every day is an “ordinary” task, not something that they really need to be concerned about.

    Yet there are hundreds of thousands of “materials handling” accidents every year… from small splinters, cuts or scrapes… to crushed fingers, hands and feet… even deaths.

    This video on “Materials Handling Safety” provide the information employees need to work safely when handling various types of materials.

    Topics covered in the program include:

    • Types of potential hazards.
    • Planning a job.
    • Personal protective equipment.
    • Proper lifting and moving techniques.
    • Other ergonomic considerations.
    • Hand trucks, carts and pallet trucks.
    • Mechanical lifting devices.
    • …and more.

     
    Time: 14 Minutes

  • Office
    Safety
    Office employees frequently have the feeling that since they don’t work “out on a plant floor” safety isn’t important in their jobs.

    Yet accidents and injuries in the office account for thousands of hours of lost time, and millions of dollars in Workers’ Compensation and medical costs.

    This video on “Office Safety” show employees what hazards exist in office environments, and how important it is to use good safety practices as they go about their work.

    Topics covered in the program include:

    • Safety awareness.
    • Safety housekeeping.
    • Slips, trips & falls.
    • Electrical safety.
    • …and more.

     
    Time: 22 Minutes

  • Personal Protective
    Equipment in Construction
    Environments
    “On-the-job” injuries affect all types of people doing all types of work. Each year over 1,000,000 workers are injured… at a cost to employers of over $100 billion annually. However, studies have shown that the great majority of these workplace injuries could have been prevented if proper safety procedures and workplace practices had been followed.

    SafetyMax’s training products on “Personal Protective Equipment in Construction Environments” have been specifically created to assist construction workers in selecting proper Personal Protective Equipment.

    Topics covered in the program include:

    • General workplace injury information.
    • PPE for head hazards.
    • PPE for eye and face hazards.
    • PPE for respiratory hazards.
    • PPE for hand and finger hazards.
    • PPE for foot hazards.
    • PPE for electrical hazards.
    • and more!

     
    Time: 17 Minutes

  • Respiratory Protection
    and Safety
    One of the problems with many respiratory hazards (such as fumes or gases) is that employees cannot easily “see” them.

    Even more visible hazards, such as dusts, are often accepted as part of a “normal” work environment.

    As a result, many respiratory problems only become clearly evident well after the original exposure. Yet once they occur, most respiratory problems are “chronic” and long lasting.

    To further protect employees from these hazards, both OSHA and NIOSH have issued changes to their respiratory protection requirements.

    This video on “Respiratory Protection and Safety” have been specifically created to assist facilities in complying with OSHA’s Respiratory Standard.

    Topics covered in the program include:

    • How the respiratory system “works.”
    • Common types and causes of respiratory hazards.
    • Potential effects of respiratory hazards.
    • Good respiratory safety practices.
    • Respiratory safety equipment.
    • OSHAs Assigned Protection Factors for respirators.
    • Fit testing protocols.
    • Cleaning/disinfecting procedures.
    • …and more.

     
    Time: 22 Minutes

  • Rigging Safety In
    Construction Environments
    We have all heard the phrase… “A chain is only as strong as its weakest link”. When it comes to crane operations, rigging can often be that weak link. How a load is attached to a crane can make the difference between a successful lift and an unfortunate accident.

    Crane-related accidents can often be deadly, due to the large and heavy loads that are lifted. A small miscalculation, or a brief moment of inattention, and tragedy could strike. Once a load falls not much can be done to stop it, and there is little time for people to move safely out of the way.

    A coworker could be injured, or expensive equipment and materials could be damaged or destroyed… even the crane itself. SafetyMax’s training products on “Rigging Safety In Construction Environments” remind employees that over 90% of rigging-related accidents are caused by human error… and that they are the key to preventing these incidents.

    Topics covered in the program include:

    • Physical and mental preparation.
    • Personal protective equipment.
    • Equipment inspection.
    • Hazard assessment.
    • Slings.
    • Hitches.
    • Hand signals.
    • Load angles.
    • and more!

     
    Time: 19 Minutes

  • Safety
    Audits
    A single workplace accident can be devastating. Someone can be injured… or even killed. Property, equipment or materials can be damaged or destroyed.

    And work could come to a complete standstill. All of these things can happen if efforts are not made to protect employees. One way to accomplish this is to conduct a safety audit.

    This is an examination of the work area to make sure it is as safe as possible and all potential hazards are corrected or removed.

    This training product on “Safety Audits” inform employees about the goals of a safety audit, and how all workers should become involved.

    Topics covered in the program include:

    • A workplace analysis.
    • Administrative controls.
    • Engineering controls.
    • Personal protective equipment.
    • Emergency response procedures.
    • Regulatory compliance, safety and health training.
    • Accident investigation.
    • A safety self-assessment.
    • …and more.

     
    Time: 15 Minutes

  • Safety Orientation in
    Construction Environments
    SafetyMax’s training products on “Safety Orientation in Construction Environments” address two of the most prominent safety issues confronting employers today… that of developing a good “safety attitude” in their employees, as well as providing “introductory” safety training.

    Topics covered in the program include:

    • The “mental” aspects of safety.
    • Basics of accident prevention.
    • Hazard evaluation and safety housekeeping.
    • Tool use and maintenance.
    • Fires and other emergencies.
    • Use of personal protective equipment.
    • and more!

     
    Time: 14 Minutes

  • Scissor Lifts in Industrial and Construction Environments

    Accessing high places can be difficult in many work environments.

    To reach these areas, many workers use scissor lifts. Nearly everyone has seen a scissor lift. They’re common on construction sites, both inside and out, and are often found in warehouses and other large buildings as well.

    SafetyMax’s training products on “Scissor Lifts in Industrial and Construction Environments” introduce employees to scissor lifts, make them aware of the hazards associated with these lifts and give them the information they need to work safely using a scissor lift or working near one.

    Topics covered in the program include:

    • The types of scissor lifts and the training needed to operate them.
    • The hazards associated with using scissor lifts.
    • “Pre-start” and “worksite” inspections.
    • Setting up, operating and moving a scissor lift.
    • Working on the ground near a scissor lift.

    Time: 13 Minutes

  • Slips, Trips
    and Falls
    Most employees don’t give much thought to the prospect of slipping, tripping or even falling on the job.

    Yet these types of accidents account for more workplace injuries annually than any other accident category. Many of these injuries can be disabling… or even fatal.

    This Video on “Slips, Trips and Falls” show employees the situations that can lead to slips, trips and falls, and what they can do to avoid or prevent these accidents.

    Topics covered in the program include:

    • Why slips, trips and falls occur.
    • Common causes of accidents.
    • Potential health effects of resulting injuries.
    • Techniques used to avoid injury.
    • The importance of safety shoes.
    • How to ” fall safely”.
    • …and more.

     
    Time: 17 Minutes

  • Supported Scaffolding
    Safety in Construction
    Environments
    Whenever a worker leaves the ground, the risk of an accident occurring increases dramatically. With more than 10,000 scaffold related injuries reported each year, OSHA has mandated that workers be trained on how to safely erect and use these work platforms. These products will help employers meet the training requirements of OSHAs Scaffolding regulation.

    SafetyMax’s training products on “Supported Scaffolding Safety in Construction Environments” help employees understand the dangers of working with scaffolds, and how these risks can be minimized by knowing the correct ways to erect, maintain and use scaffolding equipment.

    Topics covered in the program include:

    • Responsibilities of a “scaffold expert”.
    • Creating a level and stable foundation.
    • Platforms and planking.
    • The danger of power lines.
    • Ramps and walkways.
    • Platform hazards.
    • Personal fall arrest systems.
    • Guarding against falling objects.
    • and more!

     
    Time: 20 Minutes

  • Suspended Scaffolding
    Safety in Construction
    Environments
    Whenever a worker leaves the ground, the risk of an accident occurring increases dramatically. With more than 10,000 scaffold related injuries reported each year, OSHA has mandated that workers be trained on how to safely erect and use these work platforms. These products will help employers meet the training requirements of OSHAs Scaffolding regulation.

    SafetyMax’s training products on “Suspended Scaffolding Safety in Construction Environments” help employees understand the dangers of working with scaffolds, and how these risks can be minimized by knowing the correct ways to erect, maintain and use scaffolding equipment.

    Topics covered in the program include:

    • Responsibilities of a “scaffold expert”.
    • Platforms and planking.
    • Platforms and planking.
    • Platform hazards.
    • Personal fall arrest systems.
    • Guarding against falling objects
    • and more!

     
    Time: 20 Minutes

  • Welding
    Safety
    People have been welding in one form or another for over 2,000 years. But like many industrial processes, welding can be very dangerous.

    Whether an employee is working with the hazardous gases of an “oxyacetylene” unit… the high voltage of “stick welding”… or the combination of gas and electricity that powers “MIG” and “TIG” operations… flying sparks, toxic fumes, electric shock and high temperatures are just some of the things that can make welding a dangerous proposition.

    This video on “Welding Safety” remind employees that there are indeed a number of hazards associated with welding, and provide the information they need to work safely when involved with welding operations.

    Topics covered in the program include:

    • Getting “authorization” for welding operations.
    • Sparking and the risk of fire
    • Guards and protective barriers.
    • Hazardous fumes and ventilation.
    • The use of respirators and other personal
    • protective equipment.
    • Eye protection (welding helmets, filters, glasses and goggles)
    • Inspecting welding equipment.
    • Proper welding safety procedures.
    • …and more.

     
    Time: 14 Minutes

  • Wellness &
    Fitness
    A good wellness and fitness program can significantly improve employees’ safety records.

    Studies have found that accidents and injuries occur less frequently with employees who are healthier and in better shape.

    This video on “Wellness and Fitness” show employees how small changes in lifestyles can produce big benefits.

    While wellness is a gradual process, eliminating negative lifestyle factors can help keep employees healthy.

    Topics covered in the program include:

    • The importance of “attitude.”
    • Blood pressure and other stress related conditions.
    • Smoking.
    • Nutrition and weight control.
    • Drug and alcohol use.
    • Exercise.
    • …and more.

     
    Time: 13 Minutes

  • Working with
    Lead Exposures in
    Construction Environments
    Created specifically for OSHA’s Lead Standards for construction environments, these products are designed for employees in workplaces where lead and lead-based materials are found.

    SafetyMax’s training products on the “Working with Lead Exposures in Construction Environments” address the major areas of employee training required by the regulations. Because of the widespread use of lead-based paints, as well as other materials containing lead, these products are useful to a number of different groups including building/construction companies, manufacturers, recyclers and many others.

    Topics covered in the program include:

    • Contents of the standards.
    • “Measurement” concepts:
    • Permissible exposure limits (PEL)
    • Time weighted average (TWA)
    • Action levels
    • Exposure assessment and monitoring.
    • Methods of compliance.
    • Hygiene and housekeeping.
    • Medical surveillance.
    • and more!

     
    Time: 21 Minutes

  • Workplace Harassment in
    Industrial Facilities
    Most of us cannot do our work without interacting with other people. Effective communication is usually part of the job, and cooperation can be essential.

    When interaction, communication and cooperation are hindered in some way the workplace can become “toxic” and threaten our sense of well-being. Feelings of stress, frustration and anger can boil to the surface.

    Attendance, productivity, quality and safety often suffer.

    When people hear the word “harassment” they usually think of sexually-related activity. But harassment encompasses a wide range of behavior… from practical jokes to intimidation.

    It can also include threats, verbal abuse and discrimination, even stalking and assault… and anyone can be subject to it.

    This Video on “Workplace Harassment in Industrial Facilities” discuss the various types of harassment that are found in the workplace, how they can affect an employee’s work situation and what employees themselves can do to help prevent workplace harassment.

    Topics covered in the program include:

    • The nature of workplace harassment.
    • How to recognize various types of harassment.
    • How to handle verbal abuse and threats.
    • The many forms sexual harassment can take.
    • How to recognize the many variations of “assault”.
    • Knowing what to do, and what not to do, when confronted with a stalker.
    • …and more.

     
    Time: 17 Minutes

  • Workplace
    Stress
    In the fast-paced world that we live in, we are always encountering situations that can be stressful. Many of these occur at work. Yet stress, and its effects on our ability to do our jobs, is a subject that is often overlooked.

    This training product on “Workplace Stress” help employees identify potentially stressful situations and learn how to cope with them.

    Topics covered in the program include:

    • Situations causing stress.
    • Positive versus negative stress.
    • Recognizing symptoms of stress.
    • Effects of stress on the mind and body.
    • Eliminating “stress factors”.
    • Stress-relieving exercises.
    • …and more.

     
    Time: 13 Minutes

  • Workplace
    Violence
    One out of every six violent crimes occurs in the workplace.

    And while workplace homicides grab the headlines… (homicide is the second leading cause of death on the job and the number one killer of women in the workplace)… other forms of workplace violence happen much more frequently.

    No organization, regardless of size or type of business, is immune to workplace violence.

    This video on “Workplace Violence” show employees how to recognize the warning signs of possible violent behavior, as well as how to avoid or defuse potentially dangerous situations.

    Topics covered in the program include:

    • Underlying causes of workplace violence.
    • The warning signs.
    • Aggressive behavior.
    • Threats and verbal abuse.
    • Sexual harassment.
    • Physical assault.
    • Armed assailants.
    • Fostering a positive workplace environment.
    • …and more.

     
    Time: 14 Minutes